Transcend-information INTEL SOCKET 370 CELERON SERIES TS-ABX31 Manual do Utilizador

TS-ABX31Intel Socket 370 Celeron SeriesUSER/S MANUALYour Supplier, Your Partner,Your Friend.Transcend

2.4 66/100MHz System ConfigurationThe jumper 2 (JP2) allows you to set FSB (Front Side Bus) to be 66 or 100MHz configuration.When you set FSB to 66MHz

HARDWARE INSTALLATION7TS-ABX31 CPU Freq.-RaTranscendDIMM1 (64/72bit 168pin SDRAM Module)DIMM2 (64/72bit 168pin SDRAM Module)DIMM2 (64/72bit 168pin SDR

HARDWARE INSTALLATION 82.6 Memory ConfigurationThis motherboard must be installed with DIMM (Dual Inline Memory Module). The

9 HARDWARE INSTALLATION2.7 Keyboard Wake Up (3-pin KB-AWK)This function disables or enables you to use the keyboard to power up the syst

HARDWARE INSTALLATION 102.9 Floppy Disk Drive Connector (34-pin FDC)This connector supports the provided floppy disk drive ribbon

11 HARDWARE INSTALLATION2.11 Wake-on-LAN Connector (3-pin WOL)This connector connects to LAN cards with a Wake-on-LAN output. The system ca

HARDWARE INSTALLATION 122.13 Panel ConnectorsPower LED Lead (3-pin KEYLOCK)This 3-pin connector attaches to the power LED.Pin1 :

13 HARDWARE INSTALLATIONSoftware Power-Off Lead (2-pin SOFT_OFF)Attach the SOFT_OFF Switch of the panel to this connector.Pin19 & Pin2

HARDWARE INSTALLATION 141. PS/2 Mouse2. PS/2 Keyboard3. USB13. USB24. 5. CTS-ABX31 ExterParallel Port (Printer)COMB 5. COMArnal C

15 HARDWARE INSTALLATION2.16 Clear CMOS Jumper (3-pin JP4)To clear the CMOS data, you should turn off your computer power and short the pin

User/s Notice This User/s Manual is designed to assist system manufacturers or end usersto set up and install the motherboard. All information with

BIOS SETUP 16CHAPTER 3 BIOS SETUP3.1 BIOS SetupAward BIOS has a built-in Setup program that allows us

17 BIOS SETUPF1 General help, only for Status Page Setup Menu and Option Page Setup MenuF2 Change color from total 16 col

BIOS SETUP 183.3 Standard CMOS Setup• SUPERVISOR / USER PASSWORDChange, set, or disable a password. In

19 BIOS SETUP1. Match the specifications of your installed IDE hard drive(s) with the preprogrammed valuesfor drive type

BIOS SETUP 20• Drive A / Drive BSelect the correct specifications for the diskette drive(s) install

21 BIOS SETUP3.4 BIOS Features SetupThis “BIOS FEATURES SETUP” option allows you to improve your system performance and s

BIOS SETUP 22• CPU L2 Cache ECC CheckingSelect “Enabled” to make sure the data accuracy.• Quick Power

23 BIOS SETUP• Typematic Rate (Chars / Sec)When the typematic rate setting is enabled, you can select a typematic rat

BIOS SETUP 24each section of memory separately. Many system designers hardwire shadowing of the sys-tem

25 BIOS SETUP• SDRAM RAS-to-CAS DelayThis controls the latency between SDRAM active command and the read/write comman

Table of ContentsCHAPTER 1 INTRODUCTION 11.1 Package Contents ...

BIOS SETUP 26• Memory Hold At 15M-16MEnabling this feature reserves memory address space from 15MB

27 BIOS SETUP3.6 Power Management SetupThe Power Management Setup allows you to configure your system to save energy mo

BIOS SETUP 283. Max. Power Saving : Maximum power management mode. Inactivity period is defined

29 BIOS SETUP• Standby Mode After the selected period of system inactivity (1 minute to 1 hour), the fixed disk dr

BIOS SETUP 30Primary IDE 0Primary IDE 1Secondary IDE0Secondary IDE1Floppy DiskSerial PortParallel portI

31 BIOS SETUP• Resource Controlled byThe Award Plug and Play BIOS can automatically configure all the boot and Plug and

BIOS SETUP 323.8 Integrated PeripheralsThis option will load the default BIOS values. Choose the option

33 BIOS SETUP• • • • • On Chip IDE Primary / Secondary PCI IDEThe chipset contains a PCI IDE interface which supports two IDE channels. Select “Enabl

BIOS SETUP 34• • • • • Onboard Serial Port 1Select an address and the corresponding interrupt for each

35BIOS SETUP3.9 Supervisor PasswordThis option will set the password to prevent others from making changes to your system.Password prevents unauthoriz

CHAPTER 3 BIOS SETUP 163.1 BIOS Setup ...

BIOS SETUP 363.10 User PasswordThis option will set the password to prevent others from making changes

37BIOS SETUP3.13 Exit Without SavingAbort the current change and exit the BIOS utility.3.12 Save & Exit SetupSave the setting and exit the BIOS ut

BIOS SETUP 383.14 Load BIOS DefaultsNOTE: This option allows you to load the troubleshooting default va

39BIOS UPGRADE4.1 How to Check Your BIOS File Name and VersionPlease turn on PC first, the screen will display as follows :TRANSCEND MODULAR BIOS : AB

BIOS UPDATE 40Step 2: Make a System Disk- Put a clean 3.5" disk in Drive AMS-DOS : Key in FORMAT A:/S

INTRODUCTION1CHAPTER 1 INTRODUCTION1.1 Package ContentsThis motherboard package contains the following items. If you discover any damaged or missin

INTRODUCTION2- Support PS/2 mouse and PS/2 keyboard- Support IrDA port- Support 2 Universal Serial Bus Ports• Award BIOS- Support Plug-and-Play- S

HARDWARE INSTALLATION3CHAPTER 2 HARDWARE INSTALLATION2.1 Transcend TS-ABX31 Motherboard*T:Top**B:Bottom2 IDEConnectors3 DIMMSocketsI t l 440BXATX P

HARDWARE INSTALLATION42.2 Layout of Transcend TS-ABX31 MotherboardDIMM1 (64bit or ECC 168pin SDRAM Module)DIMM2 (64bit or ECC168pin SDRAM Module)DIMM2

HARDWARE INSTALLATION5TS-ABX31 TranscendDIMM1 (64/72bit 168pin SDRAM Module)DIMM2 (64/72bit 168pin SDRAM Module)DIMM2 (64/72bit 168pin SDRAM Module)CO